These revolutionary crib mattresses allow your baby to breathe freely through the open-celled topper even if they are face straight down. The side openings allow air to constantly circulate protecting your baby from harmful carbon dioxide accumulation. The 3D open-celled topper helps keep an infants core temperature stable. Not too hot, and not too cold, resulting in a longer, safer, more comfortable sleep for your baby. The crib mattress topper can be easily removed and laundered in a standard washer and dryer providing a more sanitary sleeping environment for your baby. There is no inner core, so no messy or cumbersome bathtub washing. The base is easily wiped clean while still in the crib.

The SafeSleep Breathe-Through Crib Mattresses are designed to fit in any standard size crib. They drop into a crib just like a conventional crib mattress. Actual size of base is 50-7/8″ x 27-1/4″ x 4 1/4″.  With the topper in place, the mattress measures 27 1/2″ x 52″ x 5″ 

These revolutionary breathe-through Crib Mattresses have the same amount of deflection as a standard firm crib mattress. The SafeSleep crib mattresses are the only U.S. crib mattresses that have passed the Australia/New Zealand standard for firmness.  Because of the revolutionary patented design, the topper holds its firmness and can be safely used for generations.

The toppers is made from a 3D medical grade spacer fabric manufactured in the USA. The middle layer of the spacer fabric forms a “micro-climate” which allows heat and vapor to dissipate next to the body; however, the heat is channeled into the middle layer, keeping the baby warm, while helping to maintain a stable body core temperature for a better, longer, safer night’s sleep.

The SafeSleep Breathe-Through Crib Mattress contains no harmful chemicals such as phthalates, antimony and various biocides found in conventional and organic crib mattresses. There are also no nano-coatings to make them waterproof, and no chemicals to make them flame retardant. There is no reason to make these breathe-through mattresses waterproof since they contain no fiber fill that can become contaminated.  They are naturally flame retardant by design.

Yes.  The sides are made from the same open celled fabric as the surface.  The  1 1/8″ round welting is made from the same fabric used to make medical masks.

You will have to check with your insurance provider. Most insurances require a presciption issued from a qualified physician.

Yes, if you want a spare topper we sell them as separates.  We have lots of colors to choose from.  You can also purchase a new topper when the next baby arrives to make your SafeSleep Breathe-Through Crib Mattress just like new.

The revolutionary 3D fabric of the topper dries super quick.  You can pour water on the topper and it will dry by air in 3 minutes or less.  Wiping up a mess is also easy using a wet rag.  You can also purchase an additional topper for late night changes. 

No, the topper will remain taut and firm provided you wash the topper every couple of weeks.  Use a medium heat setting.

Your mattress will last a lifetime with proper care.  

Simply add a ½ cup of bleach in the wash machine prior to placing the topper in for washing.  Let it soak for 10 to 15 minutes and complete wash cycle.

We use all high-end parts.  We use solid woods (maple and poplar), because press board has formaldehyde and is a known toxin.  We use stainless-steel hardware for durability  We use a plastic that is 10x the cost of a normal plastic because it has no off-gassing and it is non-corrosive.  It is the same plastic use for children’s toothbrushes.  The 3D spacer fabric that we use is also 10x more expensive than a normal single weave fabric.  We use this fabric because of its wonderful attributes; passive airflow, climate control, quick drying, and natural wicking process.  It is the same fabric used for high-end tennis shoes that cost $100 and up.  It takes a month for the fabric to be woven in 1000 yard lots.   We could use less expensive parts, but our first priority is “safety.”  Our mattress can be used for generations.  

The mattress has been tested for up to 80 lbs.  Your child will become too tall for the mattress before they become to heavy for it.

There is a polypropylene plastic bottom 5 inches below the topper. This surface is easily wiped cleaned and disinfected with a mild soap and cloth. This area is very easily accessible by simply lifting the bars the topper is around. There is no core, so no need to ever have to remove the mattress until its time to adjust the height settings on your crib.

No. The plastic bottom is made from recycled milk jugs. It is a polypropylene #5 which is the same plastic used for children’s toothbrushes. The bottom has a slight texture to keep liquids pooled.

The SafeSleep Breathe-Through Crib Mattress is innovatively designed to be the safest crib mattress available on the market today for your baby. It replaces foam and cotton filled mattresses with a comfortable, completely breathe-through medical grade spacer fabric surface suspended over a solid wood frame with openings on the sides allowing constant air circulation.  The SafeSleep Breathe-Through Crib Mattress base is made from solid poplar and is available in three painted finishes; white, gray, and espresso.  The SafeSleep Breathe-Through comes with your choice of six different topper colors. Additional toppers may be purchased separately

The SafeSleep Breathe-Through Crib Mattress topper has an integrated welting designed to prevent your baby’s extremities from entanglement in the crib slats. We do not recommend using any type of crib bumper since all crib bumpers, even the breathable ones, can pose a strangulation risk if your baby gets wedged under the bumper.

No. The SafeSleep Breathe-Through Crib Mattress is designed to allow your baby to sleep directly on the comfy topper. No crib sheet or mattress pad is needed. Mattress pads can artificially elevate a baby’s body temperature and can cause overheating. They also pose a positional asphyxiation risk, and they can pose strangulation and suffocation risk if they become loose.

Yes.  The crib skirt can be placed under the mattress and above the crib mattress platform just like with a conventional crib mattress.

The topper is easily removed by unsnapping the white tabs from the base and then lifting the sidebars on the crib mattress, unzipping the surface and pulling it up and off the frame. The topper is easily replaced by fitting the surface over the bars when in the upright position, zipping the surface closed on the underside and then gently pushing the bar farthest away from you down into the lock support and then snapping the white tab to the side of the base.  While holding the secured bar down, repeat the process with the bar closest to you.

If you find your topper is too tight, simply unzip the underside of the topper from 1/4 to 1/3 of the way open to reduce some of the tension. Unzipping the topper this slight amount will not affect the safety or comfort of your baby.

The welting along the outside edge will not allow the bars to spring open with force.  Make sure that the back bar is securely locked in place and the tab is snapped down before trying to lock the front bar.  Hold the back bar down while putting the front bar in place.

The topper can be washed as often as required using a standard washer and dryer. It is recommended that you wash the topper separately and use a mild detergent safe for baby’s delicate skin. You can also use bleach to remove stains.  Bleach is not recommended for every wash.  Drying the topper on medium heat will kill pathogens.  Do not use dryer sheets if your baby has sensitive skin.

No. The area beneath the crib mattress topper is intended to allow constant passive airflow and should not be obstructed with blankets or other stored items.

Yes.  The sensor pad fits between the two fabric layers of the topper.  Simply place it between the netting underside and the spacer fabric topper.